제품

TERLURAN GP-22

Terluran® GP-22 is an easy-flow, general purpose injection molding grade with high resistance to impact and heat distortion; intended for a wide range of applications, particularly in the housings sector.

Key Features

  • Excellent colorability
  • Medium flow
  • Good impact resistance
  • Good heat distortion resistance
  • High quality surface finish and gloss
  • Great mechanical strength and rigidity

Applications

  • Injection molding
  • Appliance housings
  • Household and sanitary appliances
  • Toys
  • Automotive components
  • Consumer products
  • Grade Version
  • Properties

    특성

    섭씨 23도에서 변색되지 않는 제품에 대한 일반적인 값 테스트 방법 단위
    유동적 특성
    Melt Flow Rate, 200 °C/5 kg ASTM D 1238 g/10 min 1.5
    Melt Flow Rate, 220 °C/10 kg ASTM D 1238 g/10 min 19
    Melt Volume Rate 230 °C/3.8 kg ASTM D 1238 cm³/10 min 4.8
    기계적 특성
    Izod Notched Impact Strength, 23 °C (73 °F) ASTM D 256 ft-lb/in 5.6
    Izod Notched Impact Strength, -18 °C (0 °F) ASTM D 256 ft-lb/in 1.9
    Izod Notched Impact Strength, -30 °C (-22 °F) ASTM D 256 ft-lb/in 1.1
    Tensile Stress at Yield, 23 °C ASTM D 638 psi 6520
    Tensile Modulus ASTM D 638 psi x 10³ 334
    Elongation, Failure ASTM D 638 % 2.6
    Flexural Strength, 23 °C ASTM D 790 psi 9430
    Flexural Modulus, 23 °C ASTM D 790 psi x 10³ 334
    Hardness, Rockwell ASTM D 785 R scale 103
    열 특성
    Vicat Softening Temperature, VST/A/50 (10N, 50 °C/h) ISO 306 °F 204
    DTUL @ 264 psi - Unannealed ASTM D 648 °F 172
    DTUL @ 66 psi - Unannealed ASTM D 648 °F 195
    DTUL @ 264 psi - Annealed ASTM D 648 °F 210
    DTUL @ 66 psi - Annealed ASTM D 648 °F 219
    전기적 특성
    Dielectric Constant at 106 CPS (1000000 Hz, 0,0394 in) ASTM D 150 - 2.8
    Volume Resistivity ASTM D 257 - >1013
    처리 중
    Density (ASTM ) ASTM D 792 g/cm³ 1.04
    Water Absorption, Saturated at 23 °C ASTM D 570 % 1
    Processing
    Linear Mold Shrinkage ASTM D 955 in/in 0.004 - 0.007
    Melt Temperature Range - °F 425 - 500
    Mold Temperature Range - °F 85 - 140
    Injection Velocity - in/s 8
    Drying Temperature - °F 175
    Drying Time - h 2 - 4

    Typical values for uncolored products
    Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities.
    Please consult our local sales or technical representatives for details.

  • Processing

    처리 중

  • Safety Data Sheet